• WELCOME TO SELTEC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.
Land Line : +971 42524938

Email: info@seltecuae.com

Products



CATEGORIES

UNIFLUID 10/ UNIFLUID 32

Rapidly biodegradable, ester-based cutting oils. Multifunctional application in machine tools at cutting and hydraulic oils. Non-water-polluting (see applicable Material Safety Data Sheet). Suitable for all materials.

UNIFLUID 10 is high quality synthetic esters. Compared with traditional oil coolant product has a higher flashpoint, extremely low evaporation rate and forms much less oil vapour in process of cutting.  Used for cutting and grinding cast iron, steel, and non-ferrous metals.

UNIFLUID 32 is used for processing gray cast iron, Cast iron from globular graphite, Aluminum die casting, high hard Aluminum silicon alloys, steels, cemented and improved steels, carbon steels and also Non-ferrous metals, titanium, and magnesium. UNIFLUID 32 is used for drilling operations, Milling, boring, deep drilling, grinding, honing, processes on broaches and firmware.

Specification DIN 51 550, DIN 51 524-2, DIN 51 562-1
Recommendations Machine and reservoir temperature with coolant Should not fall below 0 °C.
Viscosity Grades ISO VG 10, ISO VG 32
Series UNIFLUID 10, UNIFLUID 32

Product Product information
UNIFLUID 10/ UNIFLUID 32 Rapidly biodegradable, ester-based cutting oils....
Specification
DIN 51 550, DIN 51 524-2, DIN 51 562-1
Recommendations
Machine and reservoir temperature with coolant Should not fall below 0 °C.
Viscosity Grades
ISO VG 10, ISO VG 32
Series
UNIFLUID 10, UNIFLUID 32
PLANTOCUT SR Rapidly biodegradable, ester-based cutting oils...
Specification
DIN 51 562-1, PLANTOCUT SR is >90% biodegradable according to CEC-L-33.
Kinematic viscosity of PLANTOCUT 40 SR is 40 °C
Recommendations
Keep products protected from frost.
Viscosity Grades
ISO VG 10, ISO VG 22, ISO VG 32
Series
PLANTOCUT 10 SR, PLANTOCUT 22 SR, PLANTOCUT 32 SR, PLANTOCUT 40 SR





Inquiry Form