• WELCOME TO SELTEC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.
Land Line : +971 42524938

Email: info@seltecuae.com

Products



CATEGORIES

Neat, chlorine-free cutting oils

Product Product information
ECOCUT 3032   Free of chlorine, non-water soluble cooling...
Specification
DIN 51 525: Part 2
Recommendations
Recommended for all machining and especially automated turning and grinding operations on normal and low-alloy engineering steels, cast iron, bronze, brass and other nonferrous metals.
Viscosity Grades
ISO VG 32
ECOCUT HSG Free of chlorine, non-water soluble cooling lubricants....
Specification
DIN 51 562
Viscosity Grades
ISO VG 10, ISO VG 15
Series
ECOCUT HSG 211 LE, ECOCUT HSG 915 LE
ECOCUT HFN-UNI   Non-water soluble and chlorine free cooling...
ECOCUT HS Fully-synthetic, PAO-based grinding oils for tools,...
Specification
DIN 51 562, Viscosity at 40 °C: 5.5
Recommendations
Recommended for high speed grinding.
ECOCUT HON/HFN Honing and finishing oils for steel, cast iron...
Specification
DIN 51 562. Viscosity at 40 °C: 3.1.
Recommendations
Especially for Casting and for those working processes which require low viscosity oil.
Series
ECOCUT HON 15
ECOCUT FE 1520 Electrical discharge machining oils. Universally...
Specification
DIN 51 562-1
Viscosity Grades
ISO VG 2
ECOCUT 500 Thread-cutting oils with good EP performance. Suitable...
Specification
DIN 51 562
Recommendations
Recommended for threading.
Viscosity Grades
ISO VG 20, ISO VG 32
Series
ECOCUT 522 LE, ECOCUT 532 LE
ECOCUT 600 Deep hole drilling oils, universally applicable...
Specification
DIN 51 562-1
Recommendations
Recommended for other machining operations such as deep hole drilling, broaching, milling and thread cutting when a highly active cutting oil is required.
Viscosity Grades
ISO VG 15, ISO VG 32
Series
ECOCUT 615 , ECOCUT 628, ECOCUT 632
ECOCUT 700 Deep hole drilling oils for chrome-nickel steel...
Specification
DIN 51 562
Recommendations
Recommended for all operations on difficult to machine steel alloys.
Viscosity Grades
ISO VG 15, ISO VG 22, ISO VG 32.
Series
ECOCUT 715 LE, ECOCUT 720 LE, ECOCUT 732 LE
ECOCUT 800/8000 Broaching oils. Special oils for stainless steels,...
Specification
DIN 51 562
Recommendations
ECOCUT 830 is recommended for Cutting with a circular saw or belt saw. ECOCUT 832 and 8532 are recommended for the machining processes, which require highly active cutting oil.
Viscosity Grades
ISO VG 32
Series
ECOCUT 830, ECOCUT 832, ECOCUT 8532





Inquiry Form