Non water polluting, Environmentally friendly hydraulic oils based on special, synthetic esters. Can be used in mobile or stationary applications where a hydraulic oil that is “non-hazardous to water” is required and where the old classification according to WGK 0 is not sufficient.
| Specification |
ISO 15380: HEES |
| Recommendations |
VDMA 24 569 change over recommendations should be observed. |
| Viscosity Grades |
ISO VG 22, ISO VG 46 |
| Series |
PLANTOHYD S 22 NWG, PLANTOHYD S 46 NWG. |
| Product |
Product information |
| PLANTOHYD N |
Vegetable oil-based hydraulic fluids with additives...
| Specification |
Greater than 60% Biodegradable according to OECD 301 B, ISO 15380: HETG, RAL UZ 79: Blauer Engel (Blue Angel) for PLANTOHYD N.
Temperature Range: -27 °C to +70 °C. |
| Viscosity Grades |
| ISO VG 32 |
| Series |
| PLANTOHYD 32 N, PLANTOHYD 40 N |
|
| PLANTOHYD S-NWG |
Non water polluting, Environmentally friendly...
| Specification |
| ISO 15380: HEES |
| Recommendations |
| VDMA 24 569 change over recommendations should be observed. |
| Viscosity Grades |
| ISO VG 22, ISO VG 46 |
| Series |
| PLANTOHYD S 22 NWG, PLANTOHYD S 46 NWG. |
|
| PLANTOSYN 3268 |
Environmentally friendly, high temperature stable HVI...
| Specification |
> 60% biodegradable according to OECD 301 B,
ISO 15380: HEES. |
| Approvals |
| FENDT, O&K. Awarded the EU Ecolabel. |
| Recommendations |
| BOSCH REXROTH AG, CAT BF-1, KRAMER ALLRAD, PALFINGER, SAUER DANFOSS, TIMBERJACK, VALMET / KOMATSU FOREST, PONSSE. |
| Viscosity Grades |
| ISO VG 46 |
|
| PLANTOSYN HVI |
Hydraulic oil based on fully-saturated synthetic esters....
| Specification |
ISO 15380 HEES 46, DIN 51524-3: HVLP.
> 60% rapidly biodegradable according to OECD 301 B.
|
| Approvals |
| Tested and approved by BOSCH REXROTH (BRUENINGHAUS) in axial-piston pumps and SAUER-SUNDSTRAND. Awarded the European environmental seal. Awarded the EU Ecolabel. |
| Recommendations |
| Universally deployable in all mobile and stationary hydraulic systems. ISO 15380 change-over recommendations should be observed. |
| Viscosity Grades |
| ISO VG 32, ISO VG 46, ISO VG 68. |
| Series |
| PLANTOSYN 32 HVI, PLANTOSYN 46 HVI, PLANTOSYN 68 HVI |
|
