• WELCOME TO SELTEC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.
Land Line : +971 42524938

Email: info@seltecuae.com

Products



CATEGORIES

Wire electrical discharge machining (EDM) is a non traditional machining process that uses electricity to cut any conductive material with a thin, electrically charged wire as an electrode. During the wire EDM process, the wire carries one side of an electrical charge and the workpiece carries the other side of the charge. When the wire gets close to the part, the attraction of electrical charges creates a controlled spark, melting and vaporizing microscopic particles of material. 

TYPES

  • Zinc coated Brass EDM wire ( Soft/ Hard )
  • Elektra Plain Brass EDM wire ( Soft/ Hard )

 

 

Specification Zinc coated Brass Edm Wire 0.25 mm Soft / Hard - P5 Size (1 spool = 5 Kgs)
Zinc coated Brass Edm Wire 0.25 mm Soft / Hard - DIN 125 Size (1 spool = 3.5 Kgs)
Elektra Plain Brass Edm Wire 0.25 mm Soft / Hard - DIN 125 Size (1 spool = 3.5 Kgs)

Product Product information
Flushing Nozzle Flushing nozzles are used for flushing process....
Filters High speed cutting with wire electrical discharge...
Specification
Paper Filter small - 10mm
Paper Filter Big - 10 micron
Ion Exchange Resins Ion exchange Resin is made from strong acid...
Specification
Deion Resin
Wire Guides Wire Guides is used to guide the passage of wire electrodes....
Specification
Wire Guide 0.25 mm DIA M117
Wire Guide 0.25 mm DIA M10
EDM Wires Wire electrical discharge machining (EDM) is a non...
Specification
Zinc coated Brass Edm Wire 0.25 mm Soft / Hard - P5 Size (1 spool = 5 Kgs)
Zinc coated Brass Edm Wire 0.25 mm Soft / Hard - DIN 125 Size (1 spool = 3.5 Kgs)
Elektra Plain Brass Edm Wire 0.25 mm Soft / Hard - DIN 125 Size (1 spool = 3.5 Kgs)
Current PickUps Current Pick-up  is widely used to deliver...
Coreless Brass Electrodes Brass electrodes come in both single hole and multi-channel...





Inquiry Form