• WELCOME TO SELTEC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.
Land Line : +971 4 2524938

Email: info@seltecuae.com

Products



CATEGORIES

Cooling oil for reciprocating & rotary vane compressors with oil injection systems. Air compressor oil for all piston and rotation compressors. Also used for the compression of hydrocarbon gases like methane, ethane, propane, propene or natural gas. The RENOLIN 500 Series is made of  highly refined base oils. The selected additives make it reliable to use at high thermal stress without the formation of damaging residues. Very low Evaporation tendency and low coking.

Specification DIN 51 506: VDL. For final compression temperatures up to 220 °C.
Recommendations Recommended for reciprocating piston compressors with air discharge temperatures up to 220 °C
Viscosity Grades ISO VG 68, ISO VG 100, ISO VG 150
Series RENOLIN 503, RENOLIN 504, RENOLI 505

Product Product information
RENOLIN 200 Reciprocating (piston) and rotary air compressor oils...
Specification
DIN 51 517-1, DIN 51 506: VB, DIN 51 506: VC. For final compression temperatures of up to 160 °C.
Viscosity Grades
ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320
Series
RENOLIN 208, RENOLIN 210, RENOLIN 212,RENOLIN 213, RENOLIN 215
RENOLIN 500 Cooling oil for reciprocating & rotary vane compressors...
Specification
DIN 51 506: VDL. For final compression temperatures up to 220 °C.
Recommendations
Recommended for reciprocating piston compressors with air discharge temperatures up to 220 °C
Viscosity Grades
ISO VG 68, ISO VG 100, ISO VG 150
Series
RENOLIN 503, RENOLIN 504, RENOLI 505
RENOLIN VDL DD The RENOLIN VDL DD oils are air compressor oils for...
Specification
DIN 51 506: VDL. For final compression temperatures up to 220 °C,
Viscosity Grades
ISO VG 100, ISO VG 150
Series
RENOLIN VDL 100 DD, RENOLIN VDD 150 DD
RENOLIN SC Cooling oils for screw compressors with additives to...
Specification
DIN 51 519. Final compression temperatures up to 110 °C.
Viscosity Grades
ISO VG 32, ISO VG 46, ISO VG 68.
Series
RENOLIN SC 32, RENOLIN SC 46, RENOLIN SC 68
RENOLIN COOL+ New generation air compressor fluid for oil-injected...
Specification
DIN 51506 VDL
Recommendations
Recommended for use in oil filled screw compressors.
Viscosity Grades
ISO VG 46
RENOLIN UNISYN OL Fully synthetic hydraulic oils based on polyalphaolefines....
Specification
DIN 51506: VDL, ISO DP 6521 (draft): L-DAB, L-DAH / L-DAG, DIN 51524: HLP (HVLP).
Recommendations
RENOLIN UNIYSYN OL 32, 46 and 68 have especially been developed for the use in oil injected screw compressors and in turbo compressors. RENOLIN UNISYN OL 100 and 150 are recommended in particular for long term use in piston and rotary compressors.
Viscosity Grades
ISO VG 32, ISO VG 46, ISO VG 68, ISO VG 100, ISO VG 150
Series
RENOLIN UNISYN OL 32, RENOLIN UNISYN OL 46, RENOLIN OL 68, RENOLIN UNISYN OL 100, RENOLIN UNISYN OL 150
RENOLIN SE The RENOLIN SE are synthetic compressor lubricants...
Specification
DIN 51 506: VDL.
Viscosity Grades
ISO VG 68, ISO VG 100
Series
RENOLIN SE 68, RENOLIN SE 100
RENOLIN VAC 100 F RENOLIN VAC 100 F is based on highly refined mineral...
Specification
DIN 51 519
Recommendations
Recommended for use in all basic types of vacuum pumps.
Viscosity Grades
ISO VG 100
RENOLIN SynAir 46 Biodegradable Synthetic Polyglycol (PG) based air compressor...
Specification
Excellent biodegradability (>60%) according to OECD 301C, Service life of 8000 hours at 90 °C compression.
Recommendations
Recommended for use in flooded or oil-injected screw compressors. Also recommended for application at high temperatures to reduce oil related residues, varnish and sludge.
Viscosity Grades
ISO VG 46
RENOLIN SC MC Cooling oils for screw compressors with active substances...
Specification
Final compression temperatures up to 110 °C
Viscosity Grades
ISO VG 32, ISO VG 46, ISO VG 68
Series
RENOLIN SC 32 MC, RENOLIN SC 46 MC, RENOLIN SC 68 MC
RENOLIN LPG RENOLIN LPG series are a high-performance synthetic...
Specification
DIN EN ISO 3104
Recommendations
Not miscible and compatible with standard mineral oil based lubricants. The compression gas should be dry. Because of its polar structure, RENOLIN LPG can absorb water (more than 1%).
Common seal and elastomer materials can be used if they are compatible with polyglycol lubricants (nitrile rubber (NBR) or fluoro-silicone are recommended). Paint materials: Two-component epoxy formulations are normally resistant.
Viscosity Grades
ISO VG 100
Series
RENOLIN LPG 100, RENOLIN LPG 185





Inquiry Form