| Product |
Product information |
| Degreaser Fuchs Multiclean |
Demulsifying Solvent Cleaner
| Specification |
| Well-proven, water-rinsible cleaner for the degreasing of engines, etc. Rapidly dislodges oil residues. |
|
| ANTICORIT KL 7 |
ANTICORIT KL 7 is a Low-viscosity, barium- and zinc-free...
| Approvals |
| ANTICORIT KL 7 is approved by FAG Kugelfischer AG |
| Recommendations |
| Recommended for the final protection of mass-produced articles, especially roller bearings. |
| Viscosity Grades |
| ISO VG 14 |
|
| ANTICORIT MKR |
ANTICORIT MKR forms a thin, oily, non-sticky and non-resinating...
| Specification |
| DIN 51 562, DIN 51 757, DIN 51 369 |
| Approvals |
| Approved by Mercedes-Benz DBL 6770.20. |
| Recommendations |
| Applied by dipping as a 5 - 20 % emulsion (depending on the film thickness required) at about 70 °C. |
| Series |
| ANTICORIT MKR 5, ANTICORIT MKR 7, ANTICORIT MKR 10, ANTICORIT MKR 30. |
|
| ANTICORIT BW 366 |
ANTICORIT BW 366 is a barium free high performance corrosion...
| Approvals |
| MAN under M 3082 Typ D2. |
|
| ANTICORIT VCI UNI O-40 |
Mineral oil with VCI properties. Suitable for many...
| Viscosity Grades |
| Kinematic Viscosity at 20 °C - ISO VG 120 |
|
| ANTICORIT A |
Low-aromatic solvent and thinner for ANTICORIT products....
| Series |
| ANTICORIT A 150, ANTICORIT A 180, ANTICORIT A 220, |
|
| ANTICORIT BGI |
High Performance corrosion prevention oil containing...
| Series |
| ANTICORIT BGI 15, ANTICORIT BGI 21 |
|
| ANTICORIT BML3 |
Fully synthetic, mineral oil-free corrosion preventive...
| Specification |
| Viscosity at 40 °C: 40. |
|
| ANTICORIT BW 10/12 |
Corrosion protection fluid which forms thick, waxy...
| Series |
| ANTICORIT BW 10, ANTICORIT BW 12. |
|
| ANTICORIT BW 240 |
Solvent based longterm corrosion protection fluid.... |
| ANTICORIT BW 345 |
Solvent based longterm corrosion protection forms thick,... |
| ANTICORIT BW 10 SPRAY |
Corrosion preventive wax for protection of moulds,... |
| ANTICORIT BW 366 SPRAY |
Corrosion preventive wax spray with effective barrier... |
| ANTICORIT 04 W 2 |
The complete corrosion protection program for roller... |
| ANTICORIT 5F SPRAY |
Surface protection spray. Available as an aerosol... |
| ANTICORIT 1449 IP |
Isoparaffin solvent and thinner for ANTICORIT prod... |
| ANTICORIT CPX 3373 |
Full Solid wax conservation, free of solvent and water.... |
| ANTICORIT CPX |
High Performance corrosion preventive for cavitiy protection... |
| ANTICORIT DF |
Dewatering fluid without film forming components for...
| Series |
| ANTICORIT DF 6000, ANTICORIT DF 7000, ANTICORIT DF 8000, ANTICORIT DF 9000. |
|
| ANTICORIT DFG |
Penetrating corrosion preventive spray with good lubricating... |
| ANTICORIT DFG SPRAY |
Spray and penetrating oil with MoS2 solid lubricants.... |
| ANTICORIT DFO |
Dewatering fluids for rapid water displacement. Forming...
| Series |
| ANTICORIT DFO 6101, ANTICORIT DFO 6301, ANTICORIT DFO 7101, ANTICORIT DFO 7301, ANTICORIT DFO 8101, ANTICORIT DFO 8301, ANTICORIT DFO 9101, ANTICORIT DFO 9301. |
|
| ANTICORIT DFW |
Dewatering fluids for rapid water displacement. Forming...
| Specification |
| VOC-Free. |
| Series |
| ANTICORIT DFW 6101, ANTICORIT DFW 6301, ANTICORIT DFW 7101, ANTICORIT DFW 7301, ANTICORIT DFW 8101, ANTICORIT DFW 8301, ANTICORIT DFW 9101, ANTICORIT DFW 9301. |
|
| ANTICORIT DW THIX R2 |
Optimum chain and rope protection. Excellent wear protection...
| Recommendations |
| Recommended for conveyor belt chains. |
|
| ANTICORIT HKW 350 |
Corrosion protection fluids which form thick, waxy... |
| ANTICORIT LBO 160 TT |
Optimum chain and rope protection. Excellent wear protection...
| Recommendations |
| Also recommended for conveyor belt chains. |
|
| ANTICORIT LSB |
The complete corrosion protection program for roller... |
| ANTICORIT MBR |
Water-miscible corrosion preventive for the protection... |
| ANTICORIT OHK SPRAY |
Contact and engine protection spray. Excellent rust... |
| ANTICORIT PL 3802 39 S |
Prelube, which combine the excellent corrosion protection... |
| ANTICORIT PL 39 SX |
Hotmelt product which forms a solid film on metal surfaces....
| Specification |
| Fulfils requirements of VDA 230-213. |
|
| ANTICORIT PLS 100T |
Thixotropic 2nd generation Prelube with improved deep...
| Specification |
| Fulfils requirements of VDA 230-213. |
|
| ANTICORIT PLS 30 N |
Nonthixotropic steel mill corrosion preventive for... |
| ANTICORIT RP 30 NT |
Conventional, nonthixotropic corrosion protection... |
| ANTICORIT RP 4107 |
Barium-free, thixotropic, corrosion protection oils...
| Series |
| ANTICORIT RP 4107 LV, ANTICORIT RP 4107 S |
|
| ANTICORIT RPC 5000 |
Corrosion protection concentrate for the protection... |
| ANTICORIT RPO |
Modern corrosion protection oils of different viscosities...
| Series |
| ANTICORIT RPO 1001, ANTICORIT RPO 2002, ANTICORIT RPO 3003. |
|
| ANTICORIT RPS |
Modern corrosion protection products based on solvents....
| Series |
| ANTICORIT RPS 6201, ANTICORIT RPS 7201, ANTICORIT RPS 7601. |
|
| ANTICORIT SKR 3001 |
Mineral oil-free synthetic, medium-alkaline, corrosion... |
| ANTICORIT SKR 42 |
Mineral oil-free, synthetic hydraulic water additive... |
| ANTICORIT SPO |
Skin-pass fluid with enhanced corrosion protection...
| Series |
| ANTICORIT SPO 4, ANTICORIT SPO 8, ANTICORIT SPO 10, |
|
| ANTICORIT SYNTH SPRAY |
Fully-synthetic, mineral oil-free corrosion dissolving... |
| ANTICORIT TX |
Complete corrosion protection program for roller bearings....
| Series |
| ANTICORIT TX 10 A, ANTICORIT TX 11, ANTICORIT TX 11 LV. |
|
| ANTICORIT TX 8R |
Optimum chain and rope protection. Excellent wear protection....
| Recommendations |
| Recommended for conveyor belt chains. |
|
| ANTICORIT VCI UNI IP 30 |
VCI fluid, which is perfect combination of liquid VCI... |
| ANTICORIT VCI UNI S |
VCI powder, packed in permeable paper bags. It... |
| ANTICORIT VCI UNI T |
Easy to use VCI tablets, which is perfect for intermediate... |
| ANTICORIT VCI UNI W 50 |
VCI fluid that can be used with water-based products... |
| RENOCLEAN VR 2687/1 |
Synthetic, nitrite- and mineral oil -free cleaning...
| Specification |
| Low foam use above 35 °C. |
|
| RENOCLEAN FXM 4005 |
Biocide and fungicide free System Cleaner for...
| Specification |
Contact time: 8-24 h
pH value of 2 % emulsion is 10
Recommended Concentration Range is 1-2 % |
|
| ACTICIDE OX / MBS / WB 200 |
Biocide and fungicide for System Cleaners. Can be applied... |
| Renoclean WSO 4002 |
Spray cleaner containing hydroxides, amines, and silicates....
| Specification |
pH value of 2.5 % emulsion is 12.1
Recommended Concentration Range is 2-7 % |
|
| Renoclean FDC 4001 |
Immersion and ultrasonic cleaner Combinable with RENOCLEAN...
| Specification |
pH value of 2 % emulsion is 12.1
Recommended Concentration Range is 2-7 % |
|
| Renoclean MDA 4002 |
Sprayable immersion cleaner containing hydroxides and...
| Specification |
pH value of 2 % emulsion is 12.2
Recommended Concentration Range is 1-7 % |
|
| Renoclean FSA 4017 |
Silicate-free, sprayable immersion and ultrasonic cleaner...
| Specification |
pH value of 2 % emulsion is 12.2
Recommended Concentration Range is 1-7 % |
|
| Renoclean FSO 2010 |
Neutral de-rusting cleaner that can be applied after...
| Specification |
pH value of 5 % emulsion is 5.9
Recommended Concentration Range is 2-15 %
|
|
| RENOCLEAN FTM 1001 |
Derusting, descaling cleaner containing phosphoric...
| Specification |
pH value of 2 % emulsion is 1.5
Recommended Concentration Range is 5-50 % |
|
| RENOCLEAN SPEZIAL 2000 |
Emulsifying universal cleaner that contains phosphate....
| Specification |
pH value of 3 % emulsion is 10.9
Recommended Concentration Range is 2-20 % |
|
| RENOCLEAN GXA 3004 |
Odorless Floor and Hall cleaner suitable for all manual...
| Specification |
pH value of 2 % emulsion is 9.1
Recommended Concentration Range is 2 - 20 % |
|
| RENOCLEAN GSO 3001 |
Cleaner for transport boxes (KLT) that is used to remove...
| Specification |
pH value of 2 % emulsion is 8.6
Recommended Concentration Range is 1 - 10 % |
|
| RENOCLEAN GTM 3001 |
Liquid drying accelerator with antistatic effect for...
| Specification |
pH value of 2 % emulsion is 9.4
Recommended Concentration Range is 0.2 - 1.0 % |
|
| RENOCLEAN MSO 3004 |
Liquid salt-free natural cleaner for microfiltration....
| Specification |
pH value of 2 % emulsion is 9.8
Recommended Concentration Range is 1-5 % |
|
| RENOCLEAN MSA 3011 |
Liquid, natural cleaner for high pressure applications....
| Specification |
pH value of 2 % emulsion is 9.8
Recommended Concentration Range is 1-5 % |
|
| RENOCLEAN VR 1021 |
Liquid, salt-free, natural cleaner with low residue...
| Specification |
pH value of 2 % emulsion is 10.2
Recommended Concentration Range is 1-5 % |
|
| RENOCLEAN C 20 K 1427 |
Liquid, salt-free natural cleaner with low residue...
| Specification |
pH value of 2 % emulsion is 10.2
Recommended Concentration Range is 1-5 % |
|
| RENOCLEAN MTA 3003 |
Universally applicable liquid and sprayable cleaner...
| Specification |
pH value of 3 % emulsion is 9.7
Recommended Concentration Range is 2-7 % |
|
| RENOCLEAN VR 1798/2 |
Slightly emulsifying immersion and ultrasonic...
| Specification |
pH value of 2 % emulsion is 10.8
Recommended Concentration Range is 2-7 % |
|
| RENOCLEAN VR 1948 |
Liquid, salt-free, natural cleaner suitable for high...
| Specification |
pH value of 3.5 % emulsion is 8.3
Recommended Concentration Range is 1-5 % |
|
| RENOCLEAN MTO 3002 |
Universally applicable, low foaming, liquid and sprayable,...
| Specification |
pH value of 2 % emulsion is 9.4
Recommended Concentration Range is 1-5 % |
|
| RENOCLEAN MTO 3001 |
Universally applicable, salt-free, sprayable and immersible...
| Specification |
pH value of 2 % emulsion is 9.6
Recommended Concentration Range is 1-5 % |
|
| RENOCLEAN VR 1021 CXV |
Sprayable and immersible neutral cleaner for high pressure...
| Specification |
pH value of 2 % emulsion is 9.7
Recommended Concentration Range is 1-5 % |
|
| RENOCLEAN AKTIV DA |
Highly effective demulsifier with additional defoaming...
| Specification |
pH value of 100 % emulsion is 7.6
Recommended Concentration Range is 0.1-10 % |
|
| RENOCLEAN MTA 2001 |
Neutral builder. Immersion, Injection, ultrasonic and...
| Specification |
pH value of 2 % emulsion is 8.0
Recommended Concentration Range is 2-7 % |
|
| RENOCLEAN MTA 4001 |
Neutral to alkaline builder. Immersion, Injection,...
| Specification |
pH value of 2 % emulsion is 10.1
Recommended Concentration Range is 2-7 % |
|
| RENOCLEAN FTA 4002 |
Highly alkaline builder. Immersion, Injection,...
| Specification |
pH value of 2 % emulsion is 12.5
Recommended Concentration Range is 2-8 % |
|
| RENOCLEAN ENTFETTER 39 |
Highly alkaline builder that contains silicate. Immersion,...
| Specification |
pH value of 2% emulsion is 12.6.
Recommended concentration range is 2 - 20 % |
|
| RENOCLEAN VR 3222 |
Salt-free, Recyclable builder with corrosion protection. Immersion,...
| Specification |
pH value of 3.5 % emulsion is 8
Recommended Concentration Range is 2-5 % |
|
| RENOCLEAN FTA 4001 |
Highly Alkaline builder. Immersion, Injection,...
| Specification |
pH value of 1 % emulsion is 12.9
Recommended Concentration Range is 2-18 % |
|
