• WELCOME TO SELTEC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.
Land Line : +971 4 2524938

Email: info@seltecuae.com

Products



CATEGORIES

Solvent based longterm corrosion protection forms thick, waxy and dry films for outdoor and long-term protection. Can also be used for underfloor, cavity and axles protection.


Product Product information
Degreaser Fuchs Multiclean Demulsifying Solvent Cleaner
Specification
Well-proven, water-rinsible cleaner for the degreasing of engines, etc. Rapidly dislodges oil residues.
ANTICORIT KL 7 ANTICORIT KL 7 is a Low-viscosity, barium- and zinc-free...
Approvals
ANTICORIT KL 7 is approved by FAG Kugelfischer AG
Recommendations
Recommended for the final protection of mass-produced articles, especially roller bearings.
Viscosity Grades
ISO VG 14
ANTICORIT MKR ANTICORIT MKR forms a thin, oily, non-sticky and non-resinating...
Specification
DIN 51 562, DIN 51 757, DIN 51 369
Approvals
Approved by Mercedes-Benz DBL 6770.20.
Recommendations
Applied by dipping as a 5 - 20 % emulsion (depending on the film thickness required) at about 70 °C.
Series
ANTICORIT MKR 5, ANTICORIT MKR 7, ANTICORIT MKR 10, ANTICORIT MKR 30.
ANTICORIT BW 366 ANTICORIT BW 366 is a barium free high performance corrosion...
Approvals
MAN under M 3082 Typ D2.
ANTICORIT VCI UNI O-40 Mineral oil with VCI properties. Suitable for many...
Viscosity Grades
Kinematic Viscosity at 20 °C - ISO VG 120
ANTICORIT A Low-aromatic solvent and thinner for ANTICORIT products....
Series
ANTICORIT A 150, ANTICORIT A 180, ANTICORIT A 220,
ANTICORIT BGI High Performance corrosion prevention oil containing...
Series
ANTICORIT BGI 15, ANTICORIT BGI 21
ANTICORIT BML3 Fully synthetic, mineral oil-free corrosion preventive...
Specification
Viscosity at 40 °C: 40.
ANTICORIT BW 10/12 Corrosion protection fluid which forms thick, waxy...
Series
ANTICORIT BW 10, ANTICORIT BW 12.
ANTICORIT BW 240 Solvent based longterm corrosion protection fluid....
ANTICORIT BW 345 Solvent based longterm corrosion protection forms thick,...
ANTICORIT BW 10 SPRAY Corrosion preventive wax for protection of moulds,...
ANTICORIT BW 366 SPRAY Corrosion preventive wax spray with effective barrier...
ANTICORIT 04 W 2 The complete corrosion protection program for roller...
ANTICORIT 5F SPRAY Surface protection spray. Available as an aerosol...
ANTICORIT 1449 IP Isoparaffin solvent and thinner for ANTICORIT prod...
ANTICORIT CPX 3373 Full Solid wax conservation, free of solvent and water....
ANTICORIT CPX High Performance corrosion preventive for cavitiy protection...
ANTICORIT DF Dewatering fluid without film forming components for...
Series
ANTICORIT DF 6000, ANTICORIT DF 7000, ANTICORIT DF 8000, ANTICORIT DF 9000.
ANTICORIT DFG Penetrating corrosion preventive spray with good lubricating...
ANTICORIT DFG SPRAY Spray and penetrating oil with MoS2 solid lubricants....
ANTICORIT DFO Dewatering fluids for rapid water displacement. Forming...
Series
ANTICORIT DFO 6101, ANTICORIT DFO 6301, ANTICORIT DFO 7101, ANTICORIT DFO 7301, ANTICORIT DFO 8101, ANTICORIT DFO 8301, ANTICORIT DFO 9101, ANTICORIT DFO 9301.
ANTICORIT DFW Dewatering fluids for rapid water displacement. Forming...
Specification
VOC-Free.
Series
ANTICORIT DFW 6101, ANTICORIT DFW 6301, ANTICORIT DFW 7101, ANTICORIT DFW 7301, ANTICORIT DFW 8101, ANTICORIT DFW 8301, ANTICORIT DFW 9101, ANTICORIT DFW 9301.
ANTICORIT DW THIX R2 Optimum chain and rope protection. Excellent wear protection...
Recommendations
Recommended for conveyor belt chains.
ANTICORIT HKW 350 Corrosion protection fluids which form thick, waxy...
ANTICORIT LBO 160 TT Optimum chain and rope protection. Excellent wear protection...
Recommendations
Also recommended for conveyor belt chains.
ANTICORIT LSB The complete corrosion protection program for roller...
ANTICORIT MBR Water-miscible corrosion preventive for the protection...
ANTICORIT OHK SPRAY Contact and engine protection spray. Excellent rust...
ANTICORIT PL 3802 39 S Prelube, which combine the excellent corrosion protection...
Approvals
VDA approved.
ANTICORIT PL 39 SX Hotmelt product which forms a solid film on metal surfaces....
Specification
Fulfils requirements of VDA 230-213.
ANTICORIT PLS 100T Thixotropic 2nd generation Prelube with improved deep...
Specification
Fulfils requirements of VDA 230-213.
ANTICORIT PLS 30 N Nonthixotropic steel mill corrosion preventive for...
ANTICORIT RP 30 NT Conventional, nonthixotropic corrosion protection...
ANTICORIT RP 4107 Barium-free, thixotropic, corrosion protection oils...
Series
ANTICORIT RP 4107 LV, ANTICORIT RP 4107 S
ANTICORIT RPC 5000 Corrosion protection concentrate for the protection...
ANTICORIT RPO Modern corrosion protection oils of different viscosities...
Series
ANTICORIT RPO 1001, ANTICORIT RPO 2002, ANTICORIT RPO 3003.
ANTICORIT RPS Modern corrosion protection products based on solvents....
Series
ANTICORIT RPS 6201, ANTICORIT RPS 7201, ANTICORIT RPS 7601.
ANTICORIT SKR 3001 Mineral oil-free synthetic, medium-alkaline, corrosion...
ANTICORIT SKR 42 Mineral oil-free, synthetic hydraulic water additive...
ANTICORIT SPO Skin-pass fluid with enhanced corrosion protection...
Series
ANTICORIT SPO 4, ANTICORIT SPO 8, ANTICORIT SPO 10,
ANTICORIT SYNTH SPRAY Fully-synthetic, mineral oil-free corrosion dissolving...
ANTICORIT TX Complete corrosion protection program for roller bearings....
Series
ANTICORIT TX 10 A, ANTICORIT TX 11, ANTICORIT TX 11 LV.
ANTICORIT TX 8R Optimum chain and rope protection. Excellent wear protection....
Recommendations
Recommended for conveyor belt chains.
ANTICORIT VCI UNI IP 30 VCI fluid, which is perfect combination of liquid VCI...
ANTICORIT VCI UNI S VCI powder, packed in permeable paper bags. It...
ANTICORIT VCI UNI T Easy to use VCI tablets, which is perfect for intermediate...
ANTICORIT VCI UNI W 50 VCI fluid that can be used with water-based products...
RENOCLEAN VR 2687/1 Synthetic, nitrite- and mineral oil -free cleaning...
Specification
Low foam use above 35 °C.
RENOCLEAN FXM 4005 Biocide and fungicide free System Cleaner  for...
Specification
Contact time: 8-24 h
pH value of 2 % emulsion is 10
Recommended Concentration Range is 1-2 %
ACTICIDE OX / MBS / WB 200 Biocide and fungicide for System Cleaners. Can be applied...
Renoclean WSO 4002 Spray cleaner containing hydroxides, amines, and silicates....
Specification
pH value of 2.5 % emulsion is 12.1
Recommended Concentration Range is 2-7 %
Renoclean FDC 4001 Immersion and ultrasonic cleaner Combinable with RENOCLEAN...
Specification
pH value of 2 % emulsion is 12.1
Recommended Concentration Range is 2-7 %
Renoclean MDA 4002 Sprayable immersion cleaner containing hydroxides and...
Specification
pH value of 2 % emulsion is 12.2
Recommended Concentration Range is 1-7 %
Renoclean FSA 4017 Silicate-free, sprayable immersion and ultrasonic cleaner...
Specification
pH value of 2 % emulsion is 12.2
Recommended Concentration Range is 1-7 %
Renoclean FSO 2010 Neutral de-rusting cleaner that can be applied after...
Specification
pH value of 5 % emulsion is 5.9
Recommended Concentration Range is 2-15 %
RENOCLEAN FTM 1001 Derusting, descaling cleaner containing phosphoric...
Specification
pH value of 2 % emulsion is 1.5
Recommended Concentration Range is 5-50 %
RENOCLEAN SPEZIAL 2000 Emulsifying universal cleaner that contains phosphate....
Specification
pH value of 3 % emulsion is 10.9
Recommended Concentration Range is 2-20 %
RENOCLEAN GXA 3004 Odorless Floor and Hall cleaner suitable for all manual...
Specification
pH value of 2 % emulsion is 9.1
Recommended Concentration Range is 2 - 20 %
RENOCLEAN GSO 3001 Cleaner for transport boxes (KLT) that is used to remove...
Specification
pH value of 2 % emulsion is 8.6
Recommended Concentration Range is 1 - 10 %
RENOCLEAN GTM 3001 Liquid drying accelerator with antistatic effect for...
Specification
pH value of 2 % emulsion is 9.4
Recommended Concentration Range is 0.2 - 1.0 %
RENOCLEAN MSO 3004 Liquid salt-free natural cleaner for microfiltration....
Specification
pH value of 2 % emulsion is 9.8
Recommended Concentration Range is 1-5 %
RENOCLEAN MSA 3011 Liquid, natural cleaner for high pressure applications....
Specification
pH value of 2 % emulsion is 9.8
Recommended Concentration Range is 1-5 %
RENOCLEAN VR 1021 Liquid, salt-free, natural cleaner with low residue...
Specification
pH value of 2 % emulsion is 10.2
Recommended Concentration Range is 1-5 %
RENOCLEAN C 20 K 1427 Liquid, salt-free natural cleaner with low residue...
Specification
pH value of 2 % emulsion is 10.2
Recommended Concentration Range is 1-5 %
RENOCLEAN MTA 3003 Universally applicable liquid and sprayable cleaner...
Specification
pH value of 3 % emulsion is 9.7
Recommended Concentration Range is 2-7 %
RENOCLEAN VR 1798/2  Slightly emulsifying immersion and ultrasonic...
Specification
pH value of 2 % emulsion is 10.8
Recommended Concentration Range is 2-7 %
RENOCLEAN VR 1948 Liquid, salt-free, natural cleaner suitable for high...
Specification
pH value of 3.5 % emulsion is 8.3
Recommended Concentration Range is 1-5 %
RENOCLEAN MTO 3002 Universally applicable, low foaming, liquid and sprayable,...
Specification
pH value of 2 % emulsion is 9.4
Recommended Concentration Range is 1-5 %
RENOCLEAN MTO 3001 Universally applicable, salt-free, sprayable and immersible...
Specification
pH value of 2 % emulsion is 9.6
Recommended Concentration Range is 1-5 %
RENOCLEAN VR 1021 CXV Sprayable and immersible neutral cleaner for high pressure...
Specification
pH value of 2 % emulsion is 9.7
Recommended Concentration Range is 1-5 %
RENOCLEAN AKTIV DA Highly effective demulsifier with additional defoaming...
Specification
pH value of 100 % emulsion is 7.6
Recommended Concentration Range is 0.1-10 %
RENOCLEAN MTA 2001 Neutral builder. Immersion, Injection, ultrasonic and...
Specification
pH value of 2 % emulsion is 8.0
Recommended Concentration Range is 2-7 %
RENOCLEAN MTA 4001 Neutral to alkaline builder. Immersion, Injection,...
Specification
pH value of 2 % emulsion is 10.1
Recommended Concentration Range is 2-7 %
RENOCLEAN FTA 4002 Highly alkaline builder. Immersion, Injection,...
Specification
pH value of 2 % emulsion is 12.5
Recommended Concentration Range is 2-8 %
RENOCLEAN ENTFETTER 39 Highly alkaline builder that contains silicate. Immersion,...
Specification
pH value of 2% emulsion is 12.6.
Recommended concentration range is 2 - 20 %
RENOCLEAN VR 3222 Salt-free, Recyclable builder with corrosion protection. Immersion,...
Specification
pH value of 3.5 % emulsion is 8
Recommended Concentration Range is 2-5 %
RENOCLEAN FTA 4001 Highly Alkaline builder. Immersion, Injection,...
Specification
pH value of 1 % emulsion is 12.9
Recommended Concentration Range is 2-18 %





Inquiry Form