• WELCOME TO SELTEC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.
Land Line : +971 4 2524938

Email: info@seltecuae.com

Products



CATEGORIES

High-performance gear and circulating oils with good aging stability. It contains additives to improve corrosion protection (also combat steel and non-ferrous metal corrosion caused by moisture). Excellent anti wear characteristics, good EP / AW performance, good demulsifying properties, very good foaming behavior, excellent scuffing load carrying capacity and protection against micropitting, excellent FE8 roller bearing wear protection, zinc-free and silicone oil free.

 

Specification DIN 51517-3: CLP, ISO 6743-6, ISO 12925-1: CKC, CKD, AGMA 9005/E02: EP
Approvals Approved by well-known gear manufacturers.
Recommendations Universal gear oils for industrial applications such as in bearings, joints, spur, bevel and worm gears and whenever the manufacturer recommends an oil of this type.
Viscosity Grades ISO VG 68, ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320, ISO VG 460, ISO VG 680
Series RENOLIN CLP 68, RENOLIN CLP 100, RENOLIN CLP 150, RENOLIN CLP 220, RENOLIN CLP 320, RENOLIN CLP 460, RENOLIN CLP 680.

Product Product information
RENOLIN UNISYN CLP Fully-synthetic, PAO-based gear oils with excellent...
Specification
DIN 51517-3: CLP, ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE, AGMA 9005/E02: EP, AIST 224, David Brown S1 53.101, FAG requirements: FAG-FE8-Test: stage 1-4 pass, SKF requirements: pass (100 °C test)
Approvals
Approved by well-known gear manufacturers.
Viscosity Grades
ISO VG 68, ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320, ISO VG 460, ISO VG 680, ISO VG 1000.
Series
RENOLIN UNISYN CLP 68, RENOLIN UNISYN CLP 100, RENOLIN UNISYN CLP 150, RENOLIN UNISYN CLP 220, RENOLIN UNISYN CLP 320, RENOLIN UNISYN CLP 460, RENOLIN UNISYN CLP 680, RENOLIN UNISYN CLP 1000.
RENOFLUID TF 1500 Hydraulic and gear oil containing EP additives which...
Specification
DIN 51524-2: HLP, ISO 6743-4: HM
Approvals
Officially approved by VOITH Turbo.
Viscosity Grades
ISO VG 32
GEARMASTER ECO Environmentally harmless synthetic ester-based gear...
Specification
DIN 51 517-3, FZG Test A/8.3/120-Loadstage > 12.
Biodegradability is >90 % according to CEC L-33A-93.
Temperature Range: -30 to +150 °C.
Approvals
Bosch Rexroth, FAG, Flender, Jahnel Kestermann, KHD, Pekrun, SKF, ThyssenKrupp Fordertechnik, Loesche.
Recommendations
GEARMASTER ECO oils are compatible with most commonly-used paints and seals. In case of doubt, use paints based on two components and sealing materials with sufficient compatibility.
Series
GEARMASTER ECO 68, GEARMASTER ECO 100, GEARMASTER ECO 150, GEARMASTER ECO 220, GEARMASTER ECO 320, GEARMASTER ECO 460, GEARMASTER ECO 680.
RENOLIN CLP High-performance gear and circulating oils with good...
Specification
DIN 51517-3: CLP, ISO 6743-6, ISO 12925-1: CKC, CKD, AGMA 9005/E02: EP
Approvals
Approved by well-known gear manufacturers.
Recommendations
Universal gear oils for industrial applications such as in bearings, joints, spur, bevel and worm gears and whenever the manufacturer recommends an oil of this type.
Viscosity Grades
ISO VG 68, ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320, ISO VG 460, ISO VG 680
Series
RENOLIN CLP 68, RENOLIN CLP 100, RENOLIN CLP 150, RENOLIN CLP 220, RENOLIN CLP 320, RENOLIN CLP 460, RENOLIN CLP 680.
RENOLIN CLP PLUS High-performance gear and circulating oils. They provide...
Specification
DIN 51517-3: CLP, ISO 6743-6, ISO 12925-1: CKC, CKD.
Approvals
Approved by well-known gear manufacturers.
Viscosity Grades
ISO VG 46, ISO VG 68, ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320, ISO VG 460, ISO VG 680
Series
RENOLIN CLP PLUS 46, RENOLIN CLP PLUS 68,RENOLIN CLP PLUS 100, RENOLIN CLP PLUS 150, RENOLIN CLP PLUS 220,RENOLIN CLP PLUS 320, RENOLIN CLP PLUS 460, RENOLIN CLP PLUS 680
RENOLIN CLPF SUPER EP gear oils with synergetic chemical EP/  AW...
Specification
ISO 12925-1: CKC, CKD
Approvals
Approved by well-known gear manufacturers.
Viscosity Grades
ISO VG 100, ISO VG 220, ISO VG 320, ISO VG 460, ISO VG 680, ISO VG 1500
Series
RENOLIN CLPF SUPER 100, RENOLIN CLPF SUPER 220, RENOLIN CLPF SUPER 320, RENOLIN CLPF SUPER 460, RENOLIN CLPF SUPER 680, RENOLIN CLPF SUPER 1500
RENOLIN AWD Special gear and circulating oils when products with...
Specification
DIN 51517-3, ISO 12925-1: CKC; CKD, Brugger value >70 N / mm2.
Viscosity Grades
ISO VG 68, ISO VG 150, ISO VG 220
Series
RENOLIN AWD 68, RENOLIN AWD 150, RENOLIN AWD 220
RENOLIN PG Fully synthetic gear and circulating oils based on...
Specification
DIN 51517-3: CLP-PG, ISO 12925-1: CKC; CKD; CKE; CKT.
Approvals
Approved by well-known gear manufacturers.
Recommendations
RENOLIN PG oils are primarily used to lubricate steel bronze worm gears and are recommended for applications subject to unfavorable friction conditions and very high temperatures (e.g. calendar lubrication and paper machine oil)
Viscosity Grades
ISO VG 32, ISO VG 46, ISO VG 68, ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320, ISO VG 460, ISO VG 680, ISO VG 1000
Series
RENOLIN PG 32, RENOLIN PG 46, RENOLIN PG 68, RENOLIN PG 100, RENOLIN PG 150, RENOLIN PG 220, RENOLIN PG 320, RENOLIN PG 460, RENOLIN PG 680, RENOLIN PG 1000
PLANTOGEAR S High-performance and biodegradable gear oils based...
Specification
DIN 51517-3, ISO 15380
Approvals
Approved by well-known gear manufacturers. Awarded the European environmental seal.
Viscosity Grades
ISO VG 220, ISO VG 320, ISO VG 460, ISO VG 680
Series
PLANTOGEAR S 220, PLANTOGEAR S 320, PLANTOGEAR S 460, PLANTOGEAR S 680.
RENOLIN HighGear Gear oils based on selected paraffinic mineral base...
Specification
DIN 51517-3: CLP, ISO 12925-1: CKC; CKD; CKE.
Approvals
Approved by well-known gear manufacturers.
Viscosity Grades
ISO VG 220, ISO VG 320, ISO VG 460
Series
RENOLIN HighGear 220, RENOLIN HighGear 320, RENOLIN HighGear 460
RENOLIN HighGear Synth Based on synthetic polyalphaolefins (PAO). It contains...
Specification
DIN 51517-3: CLP, ISO 12925-1: CKC; CKD; CKE
Recommendations
RENOLIN HighGear can be used both in new gearboxes (spur, bevel, planetary and worm gears) to reduce friction, wear and noise in extreme conditions as well as in pre-damaged gear boxes and machine components to increase service life. Synthetic PAO components help reduce friction, lower operating temperatures and can increase mechanical efficiency. Excellent low temperature characteristics, high, shear-stable viscosity index.Service intervals can be extended.
Viscosity Grades
ISO VG 320, ISO VG 460, ISO VG 680
Series
RENOLIN HighGear Synth 320, RENOLIN HighGear Synth 460, RENOLIN HighGear Synth 680.
RENOLIN UNISYN XT The RENOLIN UNISYN XT range is based on new, innovative...
Specification
DIN 51517-3: CLP-HC, ISO 6743-6, ISO 12925-1: CKC; CKD; CKE, AGMA 9005/E02: EP
Approvals
Approved by well-known gear manufacturers.
Recommendations
RENOLIN UNISYN XT 220 / 320 for the use in wind turbines.
Viscosity Grades
ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320, ISO VG 460, ISO VG 680, ISO VG 1000
Series
RENOLIN UNISYN XT 100, RENOLIN UNISYN XT 150, RENOLIN UNISYN XT 220, RENOLIN UNISYN XT 320, RENOLIN UNISYN XT 460, RENOLIN UNISYN XT 680, RENOLIN UNISYN XT 1000
RENOLIN PENTOPOL RENOLIN PENTOPOL series is based on selected synthetic...
Recommendations
RENOLIN PENTOPOL M 77 and RENOLIN PENTOPOL M 175 can be used for lubrication of Morgan bearings.
Viscosity Grades
ISO VG 150
Series
RENOLIN PENTOPOL M 77,RENOLIN PENTOPOL M 175,RENOLIN PENTOPOL B 150.
RENOLIN UNISYN CLP PA Fully synthetic, newly developed polyalphaolefin based...
Specification
DIN 51517-3, SKF, FAG, VOITH VN 108.
Viscosity Grades
ISO VG 150, ISO VG 220,ISO VG 320
Series
RENOLIN UNISYN CLP PA 150, RENOLIN UNISYN CLP PA 220, RENOLIN UNISYN CLP PA 320
RENOLIN PA The oils of the RENOLIN PA Series are high-performance...
Specification
DIN 51517-3: CLP, SKF, VOITH VN 108
Viscosity Grades
ISO VG 150, ISO VG 220
Series
RENOLIN PA 150, RENOLIN PA 220
RENOLIN SynGear 220 HT Fully synthetic high-temperature EP industrial gear...
Specification
DIN 51517-3: CLP-PG, ISO 6743-6 CKC/CKD/CKT.
Recommendations
For lubrication of calenders in the paper and foils industries. Change-over guidelines must be observed.
Viscosity Grades
ISO VG 220
RENOLIN UNISYN GEAR VCI Special oil based on mineral oil or polyalphaolefin...
Specification
DIN 51517-3: CLP-HC, ISO 6743-6, ISO 12925-1: CKC / CKD, AGMA 9005/E02: EP
Recommendations
Recommended for gears and components when stored or transported or not used over a long period of time.





Inquiry Form