• WELCOME TO SELTEC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.
Land Line : +971 4 2524938

Email: info@seltecuae.com

Products



CATEGORIES

Pneumatic Diaphragm Pumps

Fluimac Pump Solution

 

Air Operated Double Diaphragm Pumps ( AODDP )

It is mainly developed around the air distribution system, the diaphragm’s high technology, the pumping chambers geometry and the valves system; this in order to extend the functionality, not only for transfer but also for dosing. FLUIMAC's diaphragm pumps are made in PP, PVDF, ALLUMINIO and AISI 316.

 

Pump Operation:

1. Suction Cycle

Compressed air fills left inner chamber, causing the opposing diaphragm to create suction, lifting the lower valve ball, pulling in fluid at the inlet.

Simultaneously the right chamber is in discharge cycle.

2. Discharge Cycle

Compressed air fills right inner chamber, causing upper ball valve to open and discharge fluid.

Simultaneously the left chamber is in discharge mode.

 

 

Markets & Applications

Automotive, Mechanical, Chemical, Food, Bio Diesel, Ceramic, Textile & Leather, Paint & Varnish, Naval and Petrochemical, Pulp and paper, Pharmaceutical and cosmetic, Mining, Galvanic, Oil & Gas, Water Treatment & Printing Inks.

Features & Benefits

  • 100% wet tested after final assembly: deadheading, priming and sealing.
  • ATEX certifications in all versions: Conductive plastic pumps available.
  • Portable and compact for multi- location use, optionally with trolley
  • Dry run without damaging the pump or system: seal-less design
  • Fully submersible: can be submerged completely according to the fluid compatibility
  • Special air exhaust. Designed to operate at low noise levels.
  • Serviceability, easily maintained and quickly without any special tools.
  • Self-priming dry up to 6mtrs. Works in suction lift applications.
  • Safely dead head function, against closed discharge, without pump damage
  • Wide range of sizes and materials suited for variety of conditions and chemical fluids
  • Variable flow and head pressures, easy to adjust, without sophisticated controls
  • All bolted construction. It provides maximum leak resistance and safety
  • Can customize to specific applications. Multiple porting options available along with interface options
  • Efficient performance. High flow rates through optimal casings designs.
  • All plastic air system, Strong and corrosion resistant in harsh environments.
  • Handles liquids with solid particles. Ideal for abrasive and viscous media.
  • Efficient air distribution deisgn, low air consumption.
Product Product information
P7  
Specification
Connections: 1/4" BSP
Max flow-rate: 8 lt/min
Air connection: 4 mm
Max.head: 80 m
Self- priming capacity: 3 m
Diameter of passing solids: 2.5 mm
Max. Pressure: 8 Bar
Noise level: 62 dB
Max. Viscosity: 6000 cps
Materials: PP, PVDF, POMc.
P18  
Specification
Connections: 3/8" BSP
Max flow-rate: 20 lt/min
Air connection: 6 mm
Max.head: 80 m
Self- priming capacity: 6 m
Diameter of passing solids: 3 mm
Max. Pressure: 8 Bar
Noise level: 65 dB
Max. Viscosity: 12000 cps
Materials: PP, PVDF, POMc, SS.
P30  
Specification
Connections: 1/2" BSP
Max flow-rate: 35 lt/min
Air connection: 6 mm
Max.head: 80 m
Self- priming capacity: 5 m
Diameter of passing solids: 3.5 mm
Max. Pressure: 8 Bar
Noise level: 65 dB
Max. Viscosity: 15000 cps
Materials: PP, PVDF, POMc, SS.
P50  
Specification
Connections: 1/2" BSP
Max flow-rate: 55 lt/min
Air connection: 1/4" BSP
Max.head: 80 m
Self- priming capacity: 6 m
Diameter of passing solids: 3 mm
Max. Pressure: 8 Bar
Noise level: 68 dB
Max. Viscosity: 20000 cps
Materials: PP, PVDF, ALU, SS.
P65  
Specification
Connections: 1/2" BSP
Max flow-rate: 70 lt/min
Air connection: 3/8" BSP
Max.head: 80 m
Self- priming capacity: 6 m
Diameter of passing solids: 3.5 mm
Max. Pressure: 8 Bar
Noise level: 72 dB
Max. Viscosity: 25000 cps
Materials: PP, PVDF, ALU, INOX.
P100  
Specification
Connections: 3/4" BSP
Max flow-rate: 110 lt/min
Air connection: 3/8" BSP
Max.head: 80 m
Self- priming capacity: 6 m
Diameter of passing solids: 3.5 mm
Max. Pressure: 8 Bar
Noise level: 72 dB
Max. Viscosity: 25000 cps
Materials: PP, PVDF, ALU, INOX.
P160  
Specification
Connections: 1" BSP
Max flow-rate: 170 lt/min
Air connection: 1/2" BSP
Max.head: 80 m
Self- priming capacity: 6 m
Diameter of passing solids: 7.5 mm
Max. Pressure: 8 Bar
Noise level: 75 dB
Max. Viscosity: 35000 cps
Materials: PP, PVDF, ALU, INOX.
P250  
Specification
Connections: 1 1/4" BSP
Max flow-rate: 250 lt/min
Air connection: 1/2" BSP
Max.head: 80 m
Self- priming capacity: 6 m
Diameter of passing solids: 7.5 mm
Max. Pressure: 8 Bar
Noise level: 75 dB
Max. Viscosity: 35000 cps
Materials: PP, PVDF, ALU, INOX.
P400  
Specification
Connections: 1 1/2" BSP Dn 40.
Max flow-rate: 380 lt/min
Air connection: 3/4" BSP
Max.head: 80 m
Self- priming capacity: 5 m
Diameter of passing solids: 8 mm
Max. Pressure: 8 Bar
Noise level: 78 dB
Max. Viscosity: 40000 cps
Materials: PP, PVDF, ALU, AISI 316.
P500  
Specification
Connections: 1 1/2" BSP Dn 40
Max flow-rate: 550 lt/min
Air connection: 3/4" BSP
Max.head: 80 m
Self- priming capacity: 5 m
Diameter of passing solids: 8.5 mm
Max. Pressure: 8 Bar
Noise level: 78 dB
Max. Viscosity: 50000 cps
Materials: PP, PVDF, ALU, INOX.
P700  
Specification
Connections: 2" BSP Dn 50
Max flow-rate: 700 lt/min
Air connection: 3/4" BSP
Max.head: 80 m
Self- priming capacity: 5 m
Diameter of passing solids: 8.5 mm
Max. Pressure: 8 Bar
Noise level: 78 dB
Max. Viscosity: 50000 cps
Materials: PP, PVDF, ALU, INOX.
P1000  
Specification
Connections: 3" BSP Dn 80
Max flow-rate: 1050 lt/min
Air connection: 3/4" BSP
Max.head: 80 m
Self- priming capacity: 5 m
Diameter of passing solids: 10 mm
Max. Pressure: 8 Bar
Noise level: 78 dB
Max. Viscosity: 55000cps
Materials: PP, PVDF, ALU, INOX.





Inquiry Form