ECOCOOL MK 6 is mineral oil-based, water-miscible cutting fluid which mixes easily and forms a stable emulsion. ECOCOOL MK 6 is free of secondary amines and thus conforms to German TRGS 611.

Application

ECOCOOL MK 6 is recommended for the precision machining of common materials, e.g. aluminium and steel.

Recommended concentrations

Normal machining 8-10 %.
Difficult machining 10-15 %

Benefits

Low foaming
Allow high cutting performance
Free of chlorine, zinc and heavy metals
Tried and tested formulations
Good wetting and flushing performance
Universal application in central systems and individually-filled machines

Typical chemical and physical properties

Property	Unit	Data	Test method
Density at 15 °C	g/ml	0.92	DIN 51 757
Kinematic viscosity at 40 °C	mm2/s	50	DIN 51 562-1
Total oil content	%	70
Corrosion test emulsion > 7 %	degree of corrosion	0 - 0	DIN 51 360-2
pH value, 2 % emulsion		9.4	DIN 51 369
Handheld refractometer factor ( Testroe)		1	FLV-T 5 *)

FLV = Test procedure of FUCHS EUROPE SCHMIERSTOFFE GMBH

Application concentration:

To ensure the optimum corrosion protection and lifetime of the emulsion, we recommend a concentration of at least 7.5 %. However, the ultimate concentration must also be compatible with the materials involved and the machining operation.

Mixing temperature:

The optimum mixing temperature for water and concentrate is 15 - 20 °C. Our Application Engineers will be pleased to advise you regarding specific applications. Changes in the colour of the water-miscible cutting fluid concentrate have no detrimental effect on the quality or the performance of the product. As regards application, please observe current German VDI Guidelines 3035, 3397 Sections 1 - 3 for perfect results.

Storage conditions:

Protect from frost!

Article

CATEGORIES

Seltec FZC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.

Land Line : +971 4 2524938

info@seltecuae.com